Hi
Yes, I did same way. And here is the good news, I can turn on/off that coil from Ignition so, it solved. But not able to watch in my PLC that its actually turning on or not. I know that sounds complicated but I will explain in details with photos.
Picture 1 is showing my coil list. Picture 2 is Call function of another function where I keep all data. Picture 3 is actual function where I keep all data for Ignition.
After sending all data to Ignition, Ignition Acknowledge by turning on Coil 5 (Stn90_Leak_ResultRSP.Recorded). You can see that in Picture 2>Input O is 1 (I manually changed that from Ignition, not running actual/auto) That input is linked to in Picture3 Set bit but it is not red why?
Do you have any idea about this? Is that because of I set as Scope: Input
------------------------------------x-----------------------------x-------------------------------------x----------------------------x-------------------------------x------------------------------------
Also, I was testing our project before sending to customer and in mean while I was testing my PLC faults out. The logic for the Ignition can be found in Module 2, 06_AOI_TrackTrace_Client_NOAC2
There is a tag called Process Steps. When I manually enter 1000 into the tag it works fine. When I enter 2000 or anything higher in the tag to test the sequence the PLC faults out. I can’t find any information on the fault itself to resolve the issue.
Also attaching file for your reference can you please help me? I am also happy to connect online on Teams or Zoom maybe!
UniLogic 1.33.236
The PLC is a USC-B5-B1 There is no HMI being used – not even the virtual.
UID-0808THS Digital mode only, no high speed
UID-0808THS Digital Mode Only, No High Speed
UID-0800N Analog Input
230118_01.ulpr