Jump to content

Razim

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Razim

  1. @kratmelthanks for your suggestion, I have checked and found under hardware it says NO I/O Expansions. Does this possibly indicate something is faulty possibly the IO module?
  2. Hi Guys I have a V130 PLC that I can connect to remotely via VPN. The V130 connects to an EX-A2X and a IO-A14-A02 My question is, what is the simplest way to check if the IO-A14-A02 has any faults or is faulty? I can see my analog inputs are reading correctly. The customer said the Run light was flashing so all I can assume was it was maybe faulty? I was hoping when online is there some way of checking the module Thanks guys
  3. @Joe TauserGot it!, thanks for your help. Greatly appreciated have a great day
  4. Thanks Kratmel I appreciate the help so far very good Just another quick question, where would I enter a value of 0.1 as the increment I'm not sure how to increment by 0.1 per pulse. As I can't enter 0.1 as a preset as it only takes dec Attached is hardware config and logic
  5. Hi There I need help please. I am using a V130-T38 software version 9.8.96 I would like to add 2 memory float numbers whenever a pulse input occurs. Each pulse represents 0.1KWh. I am having trouble as the ADD F function block doesn't seem to add each time the pulse input occurs. Only when I go online and change the MF value, it add once then stops. I would then like to convert the MF to integer so I can show then on the display. Any tips on the best way of doing this. is appreciated Thank you all
×
×
  • Create New...