sota748

Thank you very much for the good feedback. 🤗 This gives me quite a bit to work with. Will return with a follow-up Happy New Year VisiLogic Version

Maybe this is my problem. In Visilogic, there is always a modem running on Com1, when I hang up, the modem stops for a very short time, but automatic dial again? I cannot stop the modem nor edit the data? Which connection does Visilogic use?, Serial or Modem? This doesn't really make any sense

Thanks, found it, but it didn´t do the trick 😞

Hi I have an old V120-22-R1 I want to connect to it using an Ethernet to RS232 converter, I use a GNOME232 https://en.papouch.com/gnome232-ethernet-to-rs232-converter-p4615/ The Ethernet RS232 port is setup with Lantronix driver software, no problem to find the converter on my network I use Windows 10 pro (VM ware) Hardware setup is PC->Network-> GNOME232 -> Original Unitronics RS232 cable -> V120 I have used the cable directly from a PC COM port a couple of years ago I have search the net for the RS232 setup for the V120, but the only thing I can find is the Baud Rate, is there no setup for Data bits, Parity, Stop bits & Flow control?