Hello,
(PLC = us5-b5-ta30)
(HSC-0 = HS Input 0 from "Uni-I/O & Uni-COM")
I have signal from generator output 50Ohm, 20V Vpp, square signal. This signal is connect to HSC-0 (Input I10) into PLC. CM1 is link to 0V. I set HSC-0 as Pulse with frequency 1000ms. I don't know what is Filter.
After run in structure IO.HSC-0 Frequency PLC show 0.
If I change input signal as sinus, PLC in structure IO.HSC-0 Frequency (Snap-In) show value <> 0 but not quite correct. (for input F=1000Hz -> show 1000, but for Fin=5000Hz -> Show 7500). Previous solution I had based on V130 and works great and precisely.
I try set different combination with HSC-0 but without result.
How to properly connect the output of the generator to the input of the HSC? And How to properly set device HSC-0 ?