Jump to content

Yukiko

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Yukiko

  1. Yes but I can't pass from the first step that is the Uninstall when I try it, pops that error.
  2. I have the problem that in the last version of Visilogic 9.8.96 the total size of the images is greater than the old one that I had (version 9.8.31) so now it says that exceeds the limit of my Samba 3.5 I tried to uninstall the new version and install the old one but somewhere in the process something went wrong and now each time that I try to uninstall it pops the next error, and now I cant uninstall the new version, if I try to run the installer of the old version, I can only choose Repair but when I run the repair everything in my computer crashes and even I can anymore open the Visilogic. If I make again the Repair with the newest I could at least open again the Visilogic but still have the problem with the sizing. Any idea what I can do?
  3. The Samba PLC is going to be a slave ModbusRTU connected to a gateway iot that works via comm rs485. And they ask me if i can make the next arrange: All modbus registers will be type “16-bit unsigned Holding Register” and will use the standard ModBus big endian notation Inside PLC Samba Modbus Register Type R/W Value Desired BOOL 1 Number R 0,1 BOOL 2 Number R 0,1 BOOL 3 Number R 0,1 BOOL 4 Number R 0,1 BOOL 5 Number R 0,1 BOOL 6 Number R 0,1 BOOL 7 Number R 0,1 BOOL 8 Number R 0,1 BOOL 9 Number R 0,1 BOOL 10 Number R 0,1 MI 11 Number R 0 - 65535 MI 12 Number R 0 - 65535 BOOL 13 Number R 0,1 MI 14 Number R 0 - 65535 15 16 17 18 19 20
  4. Hello, I'm trying to send 15 registers of data via Modbus 485 but each register should have 16 bits unsigned, the MI are signed, Any suggestion without having to use a lot of MB? Regards
  5. I could solve it going inside the boot (tapping the screen in the startup) and for there download another program, because each time the PLC started somehow was killing the serial comm. Regards
  6. Each time I try to connect with the Serial it pops the Communication Drive Error 206. I'm sure that the Port is correct and already try with all baudrates and also to increase the timeout and nothing. Is there anyway to reboot from factory without the serial or to force the comm. Regards
  7. It is possible to communicate with another microcontroller (like Arduino) using the USB port (micro B ) directly connected to a port Mini usb controller ???
×
×
  • Create New...