xXJEQTXx

Sorry, I'm also interested in solving that problem, since it comes to me in my program, and I've been reducing the number of elements for a long time, reducing the number of processes that can be carried out at the same time and that are not necessary. Please could you explain your solution in more detail, thank you very much

I thank everyone for contributing their knowledge and suggestions to this topic. One question, Unilogic has a Scope Tracer function to monitor the behavior of some tag (well, I use it that way hehe), in this case I have used it to monitor CPU usage, here is an image about it (Image 1 ), I would like to know if this CPU tag corresponds to the consumption by the HMI or the PLC as such, I have also used this tool to determine which processes consume the most CPU resources, among my conclusions is that performing "automatic" storage " by ladder and the "DTI to File" block consumes too many resources if it is used automatically every 5 seconds, with this I have also tested the screens, when making all these changes the performance in terms of changing screens is noticeable, It could be considered a good practices manual (or well that's what I call it haha), it is worth clarifying, previously with the image that I shared with you, before this the CPU consumption was through the roof, I am also sharing an image of it with you . (Image 2). Please don't forget my question haha, I appreciate it very much. Imagen 1. Imagen 2.

I thank you for your advice. Currently I know that the equipment has good processing capacity for any type of program, in fact, the program in which I work on Unitronics (in the PLC reference that I already mentioned) is not large, but when seeing the CPU consumption and operating The HMI, in the iteration between screens is slow, well, in my opinion it is slow, the fact that it takes more than 2s or 3s to go to another screen seems slow to me. I already reduced the number of elements on each screen, I already reduced the number of storage processes, I already reduced the amount of Custom Control, but it is still slow, something I noticed after monitoring the CPU consumption with the Scope Trace tool is that after After one hour of PLC operation, consumption goes from values between 70%-100% to 40%-100%, I can't explain that. It is for these reasons that I ask this question.

Hi guys.Tips to reduce cpu usage by HMIs and ladder functions in Unilogic (USP-104-B10)? I would appreciate it.

Hi guys, I want to take a DTI and graph that data to show it on my HMI, could you explain me how to achieve it?

@Saragani, that was the mistake, thank you very much.

@Saragani Thank you for answering my question, regarding your question, yes, of course I do, I have access to the SD, I have activated the permissions for the SD (see image) and previously I had already uploaded these types of files, but instead After using a tag like the one in the initial image, it used some names that I assigned to it ("Output_1_temperature", "Output_Temperature", "Temperature"), the error arose when using the tag of a string type structure with the date or hour. ........................... ................

Hello, guys, I want to create a function (ladder) that allows me to store a DTI in the SD, for this I used the image block, but by placing the string from the RTC function to ASCII V2 as a name through a String-ASCII type structure, but I get a writing error, could someone explain the reason a little better? And if it is possible to put the date or the hour or minute by name in the DTI? .....

I apologize, i don´t knew how working the forum. Thanks to the moderators for explain me. Cut to the chase, i used the "Live Trend" Box, i set about the configuring the block, but at the moment of configurate the time laps axis "X" i don´t find said inset. Does anyone know how to set it up?

Excuse me, How i do increase the time at LiveTrend? In wich case it can´t, how i can with another trend?

Thanks, have a nice day

Hello everyone, i´m new to Unitronics equipment, excuse me if the solution is obvious but i can´t see it, i have this error in UIS-WCB1 module, panel USP-104-x10, i appreciate your contributions.