Jump to content

bettim

Members
  • Posts

    6
  • Joined

  • Last visited

bettim's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Hi, Thank you I understood, I need to write more then 20Net in Ladder (configured PWM,enable output, linearization acceleration/deceleration ..) But it is project for one or two little machines. I wanted to know if I can start the project with jazz or should necessarily pass to other PLC. (JAZZ is simple and cheap ) Regards, BAHO
  2. Hello to All, I need to drive stepper motor for one little machine, but before tacking controller want to know if anyone has tried to drive stepper motor with JZ10-11-PT15. With what frequency work well. For me is enough 10-15Khz,(In the manual maximal freq.is 0.5khz for pnp and 32khz for npn) Baho
  3. Hi,Joe T. I made program for encoder it is working,right rotation count up left rotation count down but , reading speed is very small. If you have solution for Jazz plc send me. (I need to connect encoder with 500 imp/rot in Jazz plc) Regards
  4. Hi,Emil Yes, but Jazz plc have two high speed inputs, If I use like counter input is working well with high speed I will tray sometime and forget it.
  5. Thank you, Emil I made program “U90Ladder” to use two inputs of Jazz like A&B signals but rotating speed must be small and encoder with small number imp/rot.
  6. Hi all, I need to connect Incremental Shaft Encoder at JAZZ plc Can anybody help me to use two HSI inputs at JAZZ like M90, Shaft Encoder Best Regards
×
×
  • Create New...