_GS_

Hi, I'm trying to build a little program with Drum Sequencer and I have some problems. Please tell me why configured and run sequencer started only with SB2 "Power-up bit"? When I run this simple program with MB-s or others Inputs it didn't work. Best regards Grzegorz

I've got next problem. Connection from Your advice works with single net, but why it doesn't work with parallel nets? I explain what I want to reach. At first (starting) display, string "F1 - BIOS Setup" is showed by 10 seconds. After this time MB2 sets. Parallel, in the same time is showing small picture (picture under text: KontrFazy). After 10s MB42 sets. Different timers ( TD0 and TD1) connected to SB2.

Thanks for quick answer. I tried to use your advice. It's work. ;-) I made it with little modyfication. I expand and connect my "hiding text" with SB2. Look at it.

Hi Emil, I want to reach result: at first display window I want to show text (not picture) for few seconds. After this time showed text should hide, but .... ;-(. Now I'm using hide bits (last row in properties of HMI Object type: Text) pic3.jpg. MB0 is a bit activated by !Start-Up Module link & jump (pic2.jpg) . Grzegorz

Hi AlexUT, I' ve searched for help. I found explanation how timers work, but didn't find sth about timer's flags. Mayby my Visihelp is incomplite (I use VisiLogic 9.3.1) . Grzegorz

Hi , Is anyone who tried to use Timers (TA or TE or TD) with different MBs as flags? Grzegorz

Thank's I'll do it. GS

I try build simple application with some external signals. User via little keyboard controls few relays. All may to work with differents mode of operations. The modes control V350. Keyboard is connected to I0 - I109. To I10/an0 and I11/an1 I've connected analog siglals from pressure sensors. I build slow time changing system. I've used Immediate Read/Write to receive or send signals between V350 and world. Is this wrong? It will correct to use Direct Contact or Coil? Best Regards for all Grzegorz

Hello, I'm new on this forum and I haven't to much experiences with V350 programming. My first little program doesn't works :-(. After buliding project I receive information: Error type 705: The defined hardware configuration does not support immediate input 6 Error type 705: The defined hardware configuration does not support immediate input 7 Error type 705: The defined hardware configuration does not support immediate input 8 Error type 705: The defined hardware configuration does not support immediate input 9 Data sheet of V350-35-R2 describes: - 12pnp/npn Digital inputs (including: 2 Analog and 3HSC/Shaft encoder), - 6 Relay Outputs. I want to use 10 pnp digital, 2 analog inputs and all outputs. Is anyone who may help me? Best Regards for all Grzegorz