Please few advices...
i use V130-33-T30 and PWM output.
My main voltage is 24 Vdc, and i need 50% of the main voltage = 12 Vdc output for LED, just for test PWM.
So i use PWM output O0 with next parameters:
Frequency 50Hz(20msec), so i use MI0=8 ( 8 x base 2.5msec = 20 msec)
Duty Cycle 50%, so i use MI1=500 ( 500 x base 0.1% = 50 %)
Run = MB0
So when i set MB=1, i get unstable output from 10.9V to 12.8V, it is not a constant output voltage, it is very unstable.
Am i doing something wrong , or ...??
Please, any advice will be very helpfull!!
Thank You very much,
best regards!