Jump to content


  • Posts

  • Joined

  • Last visited

Moran's Achievements

Advanced Member

Advanced Member (3/4)



  1. Hi needs some help.. i have a project need to simulate sensors. i need to receive some bytes over Ethernet every 1ms and than i have to take the first 5 bytes and send them over spi next 5 bytes to translate to analog voltage and so on.. can I implement it with plc? Is there spi module communication? thanks moran
  2. Hello i need to generate a square signal at 56khz 2.5v with the capability 50mA to the load can i use V200 PWM? is there another way to perform it? Thanks Moran
  3. hello, i downloaded the latest com driver dll (2015) and try to communicate with PLC V700 thru the Serial Port code example. each time i try to connect i get Error message System.BadImage format Exception. when i try to read PLC version with visilogic software i have no problems. please help.. thanks, Moran.
  4. I see.. is it possible to send a short video to the PLC and then email it to the operator? if not maybe you can think on another solution? thanks for your reply .
  5. hi Alex, maybe i didnt explained myself very good. i didnt mean to stream video from PLC to cell phone, what i need is 2 things: first , an IP camera connecting to the PLC and stream video to PLC HMI screen. second , Remote control the PLC thru web server from PC or Cell Phone and to be able to see the video on the PLC HMI . Best Regard.
  6. Hello, i'm trying to improve some process at work. i need to confirm the quality of a video shown on a display. today an operator comes to the display and confirm it manually. I want to connect an IP camera to a PLC, the camera will stream video to the PLC and give the operator the ability to confirm the video from the web (his smartphone fo example) What I need is: 1. PLC send e-mail to the operator. 2.PLC shown on the HMI display the video from the camera 3. the operator will connect to the PLC with tablet or cell phon. 4. the operator will confirm ( press OK button) if the video on the PLC HMI is o.k is it possible ? can someone please help with that? thanks..
  7. Thanks alex is there any example using ethernet and camera?
  8. Hi, is it possible to connect USB camera to UniStream PLC and see the video in real time on the PLC screen? if yes, is there any recommended camera? thanks.
  9. Hi that what i was planing to do use a multimeter with rs232. thanks for your reply
  10. Hi joe thanks fir your reply i need both, resistance value and continuity in wiring moran
  11. Hello is there any way to measure resistance with V570 PLC? is there any module i can use? i neet to check some shorts and disconnection in a cable thank
  12. Hi, I am using unistream PLC and trying to display pdf documents to the user. I notice that it is not possible to store more than 4Mb. Is there any way to overcome this issue? use SD card maybe? thanks
  13. Hi ok i find my mistake i put 0 in the number of rows parameter in the store DTI to file function. this is what happens when you write ladder program at 24:00 o’clock thank for your help
  14. Hi thanks for your reply. befor i used the function store dti to file I inserted 2 row to the table with write to dti function and i verified with the online mode that the values were inserted to the table and then i used the store function and recive the error -31 When I looked in the sd card I couldn’t see the dt file supposed to be created.
  • Create New...