Search the Community
Showing results for tags 'high speed counter'.
Found 3 results
-
Hi all, I'm new to this forum and wish to pick the brains of anyone that could suggest a fix for a very unusual problem is occurring on a vision 570 with v200-18-E3XB snap in. We have built 5 identical machines that are essentially batch fillers using the vision 570 with V200-18-E3XB. All machines have identical programs. We have a flow meter that pulses out 1 pulse for every gram of product or about 25 pulses per second. we feed this pulse into the HSC and totalise until the desire value is reached . simple! except one of the machines counts for a while , say a minute or two -
I am using a IO-D16A3-RO16 and have 3 flow sensors I need to attach, I have two attached to the HSC and want to know if possible and how to do it, is connect the other flow sensor up to a standard digital input? The flow sensor can give a max pulse rate of 73.33 pulses per second. -
Hi I am new to visilogic and PLC's in general so excuse me if my question is a simple one. My PLC is a Vision 130, which has high speed inputs and outputs. I understand that with the use of PID function blocks you can produce a PWM output signal but I am looking to interpret a PWM signal from a device to the PLC. The device is a synchronisation relay to synchronise a generator to the grid. It produces the following: data is pulse width modulated SYNC: 8ms high 1: 4 ms high 0: 2 ms high ; a data packet consists of 10 bits data: first sync 8mS high then b0-b1-b2-b3-b4-b5-b6-b7-b8-b9 I wa
