Hi All,
The loadcell has been calibrated with 4 points (5, 20,50,100 grams) , zero acquired, calibration saved.
Motion band has been set (LC Motion Band = 2)
The auto-zero-tracking is set to pretty tight definitions: LC time = 1, LC tracking band = 1, tracking range = 1, and activated.
Everything works fine for some time - the loadcell output is pretty steady on zero, some minor fluctuations here and there but it seems that the zero correction fires every now and then to correct.
However, in a matter of hours, zero begins to drift ( up to some 18 grams), which makes the whole application