Search the Community
Showing results for tags 'exf-rc15'.
Hello, I want to use this first time PTO output like stepper. I use electronic on 5v to controll stepp motor. I send 5V pulses on stepper drive from mcontroler output. That works with mcontroller but I want to make it with plc. On this unitronics high speed output voltage level is 24 or is it 5V? Can you post some shema how do you controll stepp motor with this, like nema 34 for example. And how many steps per second can this output give? Thanks
Hello all, We would ask you for help or advice, we have some problems with communication between this two PLC-s V1210 ( moduleV200-18-E46B) and remote I/O EXF-RC15 via CAN bus. We control with 5 servo motors (Yaskawa), two of them is controlled by V1210 and other 3 by EXF-RC15. Everything keeps smooth when we control only 2 motors which are attached to V1210. Problems starts when we finish programming some of other three motors controlled by EXF-RC15 - (when we need communication between this two PLC-s’9. For example when we push on run bit for one motor (Button on V1210 display), its pushes on all other motors run bit etc. We send data about run bits from EXF-RC15 to V1210, but cant send same in other way and for that reason RC15 does not send to V1210 info when run bit is off ? At the and we solved problem with auxiliary bits through ladder logic but we really want to know what is problem. In attachment u can find both programs, i hope that you will look at it, and give us some advice... We would really appreciate any kind of help.... RC15.vlp V1210.vlp
Nikolay Kovalev posted a topic in Vision & Samba PLC + HMI Controllers & VisiLogic SoftwareDear all, Could you please give explanation of one question: how can i use EXF-RC15? I should connect this module directly to PLC Vision via Canbus? Can I use a several EXF-RC15 modules with one Vision via Canbus? Thank you in advance! Nikolay.