Search the Community
Showing results for tags 'gprs modem'.
Hi I'm working in a proyect to the Variadores S.A Company in bogota, Colombia. They need communicate the plc with the pc vía GPRS, ussing the program Remote Access and two ENFORA modems. I have two SIM CARDs one for the modem and one for the other. Claro S.A provides me two IP address whit a APN Server; this is a private network. In my program i have: - name of the PLC ---- Visio570. - Com init ---- i connect my modem in the port #2. - gprs configuration and gprs registration. int the grps registration I'm going to set a MI where the program save the ip address (this is the ip address of the MODEM PLC). You also have to set the APN Server. - IP to ASCII --- With This function Block the OPCL save your IP Address. -Start Call ----> I configured the remote tcp/ip port the number 20257 but i'm no sure about that (unitronics have a video with this proyect but in the video the por tcp/ip is 5000) I am confused about that. I also cofigured the ip addres of the second modem, the second modem is the PC modem. - end call -listen mode ---> i configured the port --- 20257. - end listen mode. -unregistered. I connected the network and inicializated the two modems, one for the PLC side modems and the other for PC side modems. when I turn on the plc and the modems, the plc save the modem ip address and displayed on the screen. when I pressing the button LISTEN, the bit connectect turn on. But the bit Call status neve turn on, when I pressing the button Call , The PLC diplayed the message MODEM TIME OUT ERROR. I have to do I have to do something very similar to the video on youtube with the name WEBINAR-MODEM. Please this proyect is urgent for the company. THANKS FOR YOUR HELP!!!!!!!!!!!!!!!!!!!
CarlDevin posted a topic in Vision & Samba PLC + HMI Controllers & VisiLogic SoftwareHi! Good day, I'm trying to program a remote monitor application my PLC, through internet: Station: PLC (GPRS Modem) Remote Monitor: PC (DSL Broadband --> Router ---> PC) The PLC GPRS registration seems OK, and it gives an IP Add to my device, Then set such unit to Listening Mode: (port 20257) While on the Remote side, I've tried to Call the IP address indicated on PLC GPRS Registration and using port 20257 but connection failed. I've also tried port forwarding on my router but error persist. I think this setup will work, but i don't where am i lacking into.. please, any inputs are very much appreciated... Thank you