Search the Community
Showing results for tags 'second'.
Found 2 results
-
Hi support and forum members I have successfully used the Visilogic project examples to log data using an SD Card. However, the example program uses SB13 to write data to the SD card every 1 second. This is far too frequent for my application. I want to log data every minute, or every 10 minutes. How can I reduce the write frequency? Do I need to use some delay timers? Can anybody assist me with the correct/optimal ladder for this. Picture of code attached. I'd also like to know how to display the free space in MB or GB left on the SD card Best Regards -
Hello, first please accept my apology for my bad english. I`m using SB 13, which should do a pulse everytime SB 3 rises (every second). I`m increasing value by INC function block by positive transition contact of SB 13. Works well for like a minute and then it starts increasing around 50 values per second. It lasts for around 5 seconds and then it goes back to normal. When I`m watching online test and this situation happen, the ---[P]--- of SB 13 starts flashing a lot. Joining my VisiLogic project. (there are unconnected nets and timers, please, don`t give it attention) Thanks in advance for quick reply. Best regards, Martin Půta V280-2016_15_5 (1).vlp