Search the Community
Showing results for tags 'snmp'.
I am using a US5/7-x5-T42 combo unit in a small enclosure that customers often install in areas that are not easily accessible. So via Ethernet connection I have a FL WLAN 1101 ethernet radio set up as an AP for VNC access. Sometimes these are standalone units and sometimes they are networked with PLC communication via wireless AP-Client mutually transparent bridge and EtherNet/IP. I dont always have the opportunity to do a site scan to make sure the radios leave configured the least amount of interference so I am trying to build in the ability to scan, display, and make changes to the radio configuration. The radio has an impressive GUI via web browser, but I don't see any way to make use of that with the model PLC i am using and I cannot switch models. So unless I missed something with being able to use a browser interface on the US5/7 T42, i have to use SNMP. The functionality in the radio via SNMP is within their MIB's but the problem I am having is calling the traps from the PLC. There really isnt a lot of documentation and instruction on using SNMP in Unilogic. At least I cant understand it from the little in the help section. Does anyone know if 1. I can use a browser on the model PLC I am using...in that case that makes things very simple for me. And if not, does anyone know how i can call and set values to traps via the PLC?
I need to know what data points can be read via SNMP from Vision 130 PLC. Can someone provide me the MIB or the different OIDs and what they're for?
Hello, I am using a V350 PLC in a project that requires SNMP communication to monitor several variables and show traps from the V350. I have already programmed the PLC to use SNMP y I've found a very simple DOS software that only receives traps from my V350 PLC, but I need to test monitoring variables by SNMP (using a MIB file). I do not know any free SNMP monitoring software for PC (windows 7) that could be configured with a MIB file and test both monitoring and traps. Does any one know some software? Thanks!
Hello! I'm using V1210 to control and monitor a container datacenter. The monitoring protocol used by the client is snmp. But there's a problem, the PLC responds only 5 variables per request. If prompted more than 5 variables, the PLC crashes. Is there any way to improve it? It is possible to use the memory card to increase the response buffering snmp?