Search the Community
Showing results for tags 'u90ladder'.
Found 5 results
-
Hi everyone, I am trying to download my project to my Jazz JZ20-R31 PLC from U90Ladder. When I go to Controller -> M90 OPLC Settings, I click "Get Version" and I do get the correct data. "Get Time & Date" works as well, and so do the other PLC -> PC functions it seems. But when I click "Set Time & Date" or "Reset" or other PC -> PLC functions including "Download", I get an error message saying: When I click "OK" the program closes. A colleague of mine has also installed U90Ladder following the same procedure I have, and everything went smoothly for him (we used the same PLC). This leads me to think that the problem is system-wide for me. I am using Windows 10. Thank you. Haris -
Hi, I'm using Unitronics PLC JZ20-J-T40, and ZView SCADA. I have successfully downloaded my program into PLC, and tested communication via usb (Serial), and via Ethernet (MJ20-ET1). It's all working properly. Problem begins when i try to connect my PLC to scada PC. With USB everything is working normally, but it's not an option for me to work with usb connection. I want to work with Ethernet communication between PLC and SCADA. What should i do to make it work? Regards Nikola Ljubinkovic -
i'm looking for simple way to pause and stop a program . does the jz20-t10 will recognize long press or short press on the same button ? is there a built in function / button for this ? -
is it possible to change font size in u90ladder ?? , i'm using jz20-t10 PLC . thanx
-
Hello everyone, we will have 2 new machines in our Company for textile processing. Both are controlled by a Jazz Unit. These 2 machines will have the same model no, but they have little differences in the handling from the software side. So we wanted to "copy" the "jazz Project" (Software) from one Jazz to the other. First surprise: One machine ist controlled by a Jazz model JZ10-11-T17 (only Serial port (optional)), the other one by a Jazz model JZ20-T18 (USB). So we asked the german Jazz Distributor, if this will work using the u90ladder Software. No Problem was the answer! Now we did it today and also upload from jz10-11-t17 and download to jz20-t18 worked FINE - without Errors in the u90ladder I mean. The only thing was, that I had to change the hardware configuration from the project for the older jazz to the new one to proceed download. Now we did it 2 times and also tried to download the "original" (backuped before) Project / program to the jz20-t18 But the jazz unit will only "boot" / start to the Information mode, also after power off and using Run? and Reset commands of the Information mode. The program for controlling textile processing is not starting! Display will Show only "Eingang (Entry) -> (i)". Press and hold < i > button then will show the Information mode - that's all. Like I said, same after Power Off, reset and so on ... The hungarian manufacturer can't help us fast (enough), the german Jazz distributor doesn't have an idea yet! Regards Björn