Search the Community
Showing results for tags 'v430'.
Found 5 results
-
Hi everyone I need some help/ideas- i have project with V430-TR34 using PTO to control one stepper motor. I did the function according to example and all works. I have JOG moves and moves to position. The only problem i have is that when I press Jog button the motor starts t move with big delay about 2 sec . I try to addjust the Acc/Dec time , but delay is the same. I tried to save the results in the table and i see that after max 100ms after Jog button the speed of PTO is as needed, but the motor has delay. Any ideas what to change/adjust. I am short of ideas - Almost a week I am struggling with this problem Thank you in advance Ognyan Obretenov -
Hello Unitronics Team, I just updated to Visilogic ver 9.8.31 and the PLC OS that is packaged with it. When I hold my finger to the touch screen for 5 seconds it goes into Info mode. When I press the "Enter Info Mode" button, I get prompted to enter a password, but no on-screen keyboard shows up. -
Hello everybody I'm currently training and my boss ask to familiarize myself with VisiLogic, it took some time but I'm coming. But here big problem, now my boss ask me to program a V430-J-T2-N for controlling SmartMotor home Animatics (a SV23165DT to be precise) it based on the program it already uses, but impossible to establish communication between the V430 and the motor via the COM1 in RS232 ... Someone should he ever had this problem or have an idea of where it can come ? Thanks (Sorry, my English is very approximate). -
Hi I have V430-J-T2 and two GSM modems Enfora (GSM-KIT-41J). I would like to remote access operands, data tables,... from PLC. Both modems are initialized properly, on PLC SB80 = 1 (modem initiailized on COM1). But any remote access failed. Also COM port is properly initialized in ladder. But when I dial there is always either "Dial timeout exceeded" or "No carrier". SIM cards are enabled for GPRS data transmission. One more thing - in Help there is written that Enhanced Vision (like V430) should have baudrate = 57600. But in that case there is never succesful PLC side modem initialization. Only in case that baudrate is 9600 initialization of PLC modem is succesful. PLC OS is up-to-date. Can you prepare an example that remote access with such hardware configuration is working. -
V430 questions
cantcliff posted a topic in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Am I reading correctly that some of the V430 series come with a 24DC power supply built in?