Search the Community
Showing results for tags 'vision 230'.
Found 2 results
-
Greetings! Several days ago we installed a new vision 230 pls. Earlier we have the same pls but unfortunately because some technical issue we need to install a new one. So finally we install it, load a old program from previous pls and unfortunately we have some problems. Our pls read the data from electrical and water meters and then send it to e-mail at end of the month. Since we installed a new pls some of the data are missing for example: Flat Cold Hot 01 115.258 0.000 02 59.079 49.297 03 235.354 0.000 04 0.000 0.000 05 153.646 90.032 Tthis zero is not correct data reading. A -
Good afternoon, Is it possble to upload a PLC program from a connected PC programmicly? I've using the Vision 230 in a peice of equipment with 100+ installations around the world, recently we added several features that we need to distrubute to all the PLC's From a hardware standpoint, we have a supervisory computer connected to #1 RS232 port. We distrubute the PC Superviory software via windows click-once, I'd like to build a batch file that would run post appilcation installation to update the PLC. 1) has anyone every done a project that the PLC code is distrubuted with a Visu