Jesus Torner 0 Posted March 5, 2012 Report Share Posted March 5, 2012 I have made a little project to communicate Unitronics and Siemens S7-1200 PLC's by MODBUS TCP: Unitronics: Software Visilogic 9.31 Unitronics IP: 192.168.1.200 MODBUS_COMM: Connect Sockets 0 and 2 as Slave with different ID to Siemens IP Address 192.168.1.204 Siemens: Siemens IP: 192.168.1.204 PLC: 1214 DC/DC/DC Software: Tia Portal V11 SP1 PLC Fw: 2.12 Modbus function: MB_CLIENT Unitronics can read DB2.DBW0 from Siemens PLC Unitronics can wirte MI3..MI5 to Siemens PLC To donwload the project click HERE More cuestions in this post. Quote Link to post Share on other sites
matteo.galli 0 Posted November 14, 2013 Report Share Posted November 14, 2013 I have to do something similar but using a Yaskawa mp 2600 instead. Why did you connect 0-2 sockets? Quote Link to post Share on other sites
m_a_s001 1 Posted April 8, 2020 Report Share Posted April 8, 2020 On 3/5/2012 at 2:06 PM, Jesus Torner said: I have made a little project to communicate Unitronics and Siemens S7-1200 PLC's by MODBUS TCP: Unitronics: Software Visilogic 9.31 Unitronics IP: 192.168.1.200 MODBUS_COMM: Connect Sockets 0 and 2 as Slave with different ID to Siemens IP Address 192.168.1.204 Siemens: Siemens IP: 192.168.1.204 PLC: 1214 DC/DC/DC Software: Tia Portal V11 SP1 PLC Fw: 2.12 Modbus function: MB_CLIENT Unitronics can read DB2.DBW0 from Siemens PLC Unitronics can wirte MI3..MI5 to Siemens PLC To donwload the project click HERE More cuestions in this post. Hello, could you load again the project? I try download but it doesn´t exists. Thank you Best regards Mario Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.