It looks like you've got it wired right. As a sanity check, remove the wire from the analog input terminal and put a meter set for milliamps between the black wire and the common to verify that the regulator monitor channel is working. Joe T. *** Edit**** Upon further review of the ITV3050 datasheet- http://www.smcpneumaticsdistributor.com/smc-part-1555/ITV3050-04N3BL4.html This regulator feedback signal is not going to work with a Unitronics analog input. The "monitor" of the regulator i
    • Upvote
    1