Jump to content

UniOPC with Wonderware FSGateway


Recommended Posts

  • 1 month later...

Hello trungnc!

I had the same problem. Are you running Windows 7 or Windows Server 2008? Because then the problem could be, that the FsGateway runs with a different Session ID than the UniOPC Server.

The Solution is, to run FsGateway not as a Service. You have to start the FGateway.exe manual (normally you can find it here: C:\Program Files (x86)\Wonderware\DAServer\FSGateway\Bin)

A better description of this you can find in the Wonderware Technote 853 http://wdnresource.w...l/1/t002648.pdf

I hope Unitronics will develope a UniOPC Version that can be configured as a Service soon!

Another thing that`s wrong in your configuration is the item name. It should look like e.g.: PLC1.MB12 (PLC1 has to be exact the same as the PLC Name in UniOPC. The Prefixes you had to use in OPCLink are not neccesary in FSGateway)

Hope this helps!

Greets Tom

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...