Jump to content

Recommended Posts


I am programing Unitronics V1210 with VisiLogic v.9.4.0.

The program I am working at, does suddenly not work as it should, when I touch the numeric displays with Keypad Entry, there I am supposed to change the numeric values, nothing happens, No keypad pop up.

And if I goes to the Information mode the password is requested, the password windows pops up but then nothing hapens, I cant type the password and cant escape.

I have puted in older version of my program that did work before, but now the same problem is there, the keypad window wil not appear, but It comes a little flash on the screen.

Is there a solution for this problem?

Link to post
Share on other sites

This is happened to me before on a V1040 and I ended up having to re-install the OS. A colleague of mine also had a similar problem as this and he ended up having to pull the Ethernet adapter out. Don't know if you are using ethernet but it might be worth a try.

Link to post
Share on other sites

Without seeing your application...just a shot in the dark...

I had a similar problem with a V570. Turns out I had an active "Show Alarm" function block, but there there was no alarm configured for the ID# specified, so it didn't appear on the screen. I could navigate through various screens no problem, but any fields/buttons that required pop-up keypads were not functional.


Link to post
Share on other sites


It seems the applicaiton calls a display evey scan. Check that all the conditions for calling a display are with one shot condition.

As Dave mentioned also calling the alarm display (using Show alarm /shpw groups) should be activated with one shot condition.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...