Jump to content

Windows 8 Communications Issue


Recommended Posts

I have had Windows 8 Running Visilogic Software successfully for the past 6 Weeks. After an issue with our Domain we had our IT support company change Passwords and had to re-join notebooks to our Domain. Once we did this, we were unable to communicate with our Vision PLC's via Serial using Prolific USB-Serial Converter. We are using latest drivers and correct chip set. We have a Communications Driver Error (206). I have tried separate Windows 8 notebook with same result. I run Visilogic software as Administrator and same result. Software runs up fine but can not communicate. Have tried other cables and checked that worked on XP machine. Any Ideas.

post-3302-0-46120500-1368415087_thumb.png

Link to comment
Share on other sites

You've probably already checked this, but confirm that the COM port didn't change. Go into Device Manager and check which COM port your USB-Serial Converter is using and make sure it matches the one in the VisiLogic Communication Settings. Also, while you're there, make sure the USB-Serial Converter is enabled and functioning properly in Device Manager.

Link to comment
Share on other sites

  • 3 weeks later...

A customer of mine have the MJ10-22-CS35 usb-rs232 converter from Unitronics. the converter was working in Windows XP but now he have a new laptop with Windows 8 64 bits and the converter doesn't work.

Do you know where to get the drivers for Windows 8?

Is there anyone with Windows 8 and MJ10-22-CS35?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...