Jump to content

Recommended Posts

Hello,

I am trying to set up a V130 to send out text messages. I am using the Enfora modem and have set everything up correctly I believe. I am using COM1 and have changed the internal jumpers to RS232. I have the COM INIT 1 block running on power up with a baud rate of 9600. I have used the Modem Services to 'Prepare PLC-side modem' with a baud rate of 9600 as well. When I plug the modem into the v130 and cycle power the connection fails (ie SB81=1). Can anyone give me insight as to what I am doing wrong?

Thank you,

BenB

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...