Jump to content

Recommended Posts

I have a ETM 9440-1 GSM modem connected to a V1040, with 6 recipients in phone book for each SMS to send

-the modem initializes OK connects in the V1040 PLC  program.

When a "SMS send" block is run, the modem sends the message to the first recipient in the address book OK

, but  then "Status Mesages" for modem return "8 - Unknown modem reply" and fails to send to remaining recipients in phone book?

 

The modem is a Cinterion  PH8-P engine, I have used Cinterion MC55i in "Init block" on startup with custom init AT commands

 

AT&F

ATE0

AT+CPIN=^XXXX^

WAIT 3

AT&C1&D1&S0Q0S0=1V1

ATX4

WAIT 3

AT+CNMI=0,0,0,0,1

AT^SCFG="Radio/Band",211,1

AT+CPMS=SM,SM,SM

AT+IPR=9600

AT&W0

ATI

 

Does the "SMS Send" block have different commands to the modem depending on what modem is selected in "Init block"??

Any help or ideas please.

 

Matt

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...