Jump to content

Replacing an CNC controller with a Vision 430 TR34

Recommended Posts


I replaced the CNC controller for WIDIA single spindle gun drilling machine with our vision 430-TR34 and used the PTO function for positioning of the drill deapth. Earlier it was done with a CNC controller which failed. The customer was having no replacement for it from the OEM because the a machine was old.


So then i adviced my clinet to change the full controls of the machine with new PLC the vision 430-TR34 and used the PTO function for position controll.


Please see the link below for the photos of the project



  • Upvote 1
Link to comment
Share on other sites

  • 2 months later...
  • 3 weeks later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...