Jump to content

Recommended Posts

Dear all;

 

I have a problem  with the canbus comunication. I need to connect a PLCV130 with a OPLC1210 and 2 EX-RC1.

 

I started with the communitacion between a OPLC 1210 (ID#1) and one EX-RC1 (ID#2), I am using the help´s  program (V570_CAN Master for EX-RC1 for PLC, and the other for the EX-RC1). With the EX-RC1 I have an IO-DI16. But it has been impossible to me to make this connection. 

 

The PLC and one EX-RC1 dont see each other in the canbus network

Any advice for me thanks.

 

I appreciate your help

 

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...