viscoelastic Posted February 11, 2016 Report Share Posted February 11, 2016 Thank you in advance. I have a K t/c into the - and + of my V200-18-E3XB snap in. I changed my jumpers as per included sheet. I hardware configured it to MB1. After download/reset, and going online (glasses) and I look at MB1 it is still 0 value. I also tried a different t/c to no avail. Do I need anything attached to CM or ACM? it is only a 2 wire t/c. Sorry I am really green to this. Quote Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted February 12, 2016 MVP 2023 Report Share Posted February 12, 2016 Did you run +24V and 0V to V2? It's not obvious in the documentation that you have to power the module for any input to work. Joe T. Quote Link to comment Share on other sites More sharing options...
viscoelastic Posted February 12, 2016 Author Report Share Posted February 12, 2016 Joe, I figured it would be something simple that would make me hang my head Thank you Joe, Paul Quote Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted February 14, 2016 MVP 2023 Report Share Posted February 14, 2016 Don't hang your head! As I said, it's not obvious. I am so brilliant on so many things Unitronics because I've made so many mistakes working with the product for 15 years, including the one you experienced. Trudge on to project success! Joe T. Quote Link to comment Share on other sites More sharing options...
MVP 2023 Ausman Posted February 16, 2016 MVP 2023 Report Share Posted February 16, 2016 +1 to what Joe has said, although I'm not so brilliant!! (Is there an emoticon for "grovel before master"?!!) I well remember scratching my head years ago on the very same issue, . At the time, I thought it was just me being stupid, but given that it looks like other people seem to be caught on this one, perhaps the literature should make it a bit more obvious. cheers, Aus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.