Jump to content

Remote TCP/serial convertertig


Recommended Posts

Good day,

 We have Scada software where data from PLC's is taken by Unitronics PCOM prtocol. When PLC's are on LAN or connected via serial - everything is fine. Is it possible to collect data with GPRS modem (SIM card with static IP address) using it as TCP serial converter?  It works when we use it as Modbus TCP to serial cobverter (but our SCADA software don't support). Can't get to work it with PCOM (transparrent TCP to serial coverter).. Any suggestion (maybe I need to do some special settings on modem) would be appreciated. Modem is GENEKO GWR202. Thank you.

Link to comment
Share on other sites

  • 2 weeks later...

Yes, it is possible.  The modems are supposedly transparent to communication.  You'll need to turn your TCP packet timeout up (SI 101) to something longer than the modem time lag.  Otherwise the PLC closes the socket on you without much explanation.

The Help says this value maxes out at 10 (1 sec) but we have pushed it to 50 and it still works.

Joe T.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...