71tomek Posted June 14, 2017 Report Share Posted June 14, 2017 Hi, Is it possible to create connection (for example by Modbus) with KEYENCE RS 232C module typ DL-RS1A and V1040? I would like to measure diameter and read it by DL-RS1A http://www.keyence.com/products/sensor/positioning/ig/models Thanks Quote Link to comment Share on other sites More sharing options...
MVP 2022 Joe Tauser Posted June 15, 2017 MVP 2022 Report Share Posted June 15, 2017 You could do this using the Protocol block to talk directly to the module. I looked at the manual for this and it seems fairly straightforward. Look at the example called "V130_Baldor_Flex_Drive" in the FB protocol directory to get a feel for what you'll need to do. Joe T. Quote Link to comment Share on other sites More sharing options...
Glow Posted June 15, 2017 Report Share Posted June 15, 2017 Hello, Keyence but it's an LS7030, I looked your FB protocol directory but it's not really clear on the help of Unilogic. Thanks for your help Quote Link to comment Share on other sites More sharing options...
MVP 2022 Joe Tauser Posted June 16, 2017 MVP 2022 Report Share Posted June 16, 2017 Um... Unilogic is for the UniStream products. A V1040 uses Visilogic. Joe T. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.