Jump to content

Recommended Posts

After being installed my Ethernet card on my device. The next level for my project is included Text messages to the mechanics everytime that line's production is down for failures. I would like to programme the logic that allows people call for help to somebody else at the workplace.

First question:  Do I need a GSM modem in order to do this????

in case of Yes, I checked the website and found this two models:

  Article Description
Modems GSM-KIT-16J KIT, MODEM GPRS, CINTERION, BGS2T
GSM-KIT-17J-3G KIT, MODEM GPRS, CINTERION, EHS6T

 

I wondering if doesn't matter any of these work with Samba PLC and I assume that I need a SIM card 3G as well or it comes with the KIT?????? 

Thanks in advance 

 

Link to post
Share on other sites

Hi, Cam

Yes, I already had the Ethernet card installed. It might work too. It's a good idea.

But let's say in the case to implement SMS like a rule for these events in the company which kit Do I have to buy because I can't see on technical info if both works with Samba PLC or where can I find out this...

Thanks  

Link to post
Share on other sites

Which Model Samba do you have some of the don't have a native RS232 port (only the SM35 does) the SM43 and SM70 program via USB and the serial port is an additional card which must be added.    If you already have an Ethernet card installed you aren't able to add the serial port.

GSM-KIT-17J-3G would be the kit required for a Samba.   The 16J kit was for UniStream only I believe, and I don't believe it's available any more.

   
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...