Jump to content

Recommended Posts

I am wondering if it is possible to set the PLC name from the HMI.  If I assign keypad changeable variables to the indirect vector MIs, can the PLC name be changed via the HMI?  Basically I would like to create a "Setup" page, where someone can enter the PLC Name and IP information.  I know IP info can be entered in the System menu, but want to simplify things by creating one HMI page with all info.  The person only needs to key in the 3 digit line number as the PLC name.  So if they put the PLC on Line 209, they would enter that on the HMI screen and then cycle power to set it in the program.  I am using a V130.

V130 setup.JPG

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...