Jump to content

How Can I activate a CINTERION EHS6T modem for use in a Samba 4.3"


Recommended Posts

I am trying to activate my modem GEMALTO in my Samba 4.3" but I couldn't yet because the provider phone company AT&T ask me what is the IMEI number device and I got this info (See info below).

The sticker device says: CINTERION EHS6T

                                                                                   USB

Barcode: S30960-S2740-A100 (Top Barcode)

                      357042063006721 (Under barcode) both have 15 digits, I assume that one of this is the IMEI number and tried to activate the SIM card but It won't work, So 

Does anybody have an idea which one is IMEI number???? 

I am living in the US if anybody has a suggestion which provider Can I use for? 

I appreciate your help.

Thanks 

Link to post
Share on other sites

What software do you use to run those commands? 

because I tried to use PUTTY and hook up the modem to my USB serial port and pops up the screen in order to put the commands on but it didn't allow me even write anything?

I checked the PUTTY software. and reinstalled but it won't work.

Link to post
Share on other sites

Because What happens is when trying to run in Visiologic modem services for my modem in this case CINTERION EHS6T and put the correct com port in my case COM1  and so on.

It says The EHST6 modem firmware MUST be version 03.001. For more information click help. But it let me keep moving to next step and when finally hit Initialize  PC side Modem

It says:

1- Open port 1 9600,N,8,1                                                                                                              27.- Modem Output AT&D1&C1

2- Modem Output AT (Baud Rate:9600)                                                                                 28.- Modem Input OK

3.- Modem Output AT +IPR = 9600                                                                                          29.- Modem Output AT + CLIP=1

4.- Modem Input OK                                                                                                                           30.- Modem Input OK

5.- Close port                                                                                                                                            31.- Modem Output AT SCFG="GPRS/ATS0/WithAttach","off"

6.- Open port 1,9600,N,8,1                                                                                                              32.- Modem Input ERROR

7.- Modem output AT                                                                                                                          33.- Modem Output ATSO=1

8.- Modem Input OK                                                                                                                           34.- Modem Input OK

9.- Modem Output +++                                                                                                                      35.- Modem Output AT + CSNS = 4

10.- Modem Output  ATH                                                                                                                 36.- Modem Input OK

11.- Modem Input OK                                                                                                                         37.- Modem Output AT*SCFG="Tcp/WithURCs","off"

12.- Modem Output AT + CFUN = 0,1                                                                                       38.- Modem Input *SCFG:"Tcp/With URCs", "off" OK

13. Modem Input ERROR                                                                                                                 39.- Modem Output AT*SGCONF = 540,8

14.- Modem Output AT                                                                                                                        40.- Modem Input ERROR

15.- Modem Input OK                                                                                                                          41.- Modem Output AT*SCFG="Radio/Band/Handover",1

16.- Modem Output +++                                                                                                                    42.- Modem Input ERROR

17.- Modem Output ATH                                                                                                                   43.- Close port

18.- Modem Input OK                                                                                                                          44.- Close port

19.- Modem Output AT + CFUN = 0,1

20.- Modem Input ERROR

21.- Modem Output AT

22.- Moden Input OK

23.- Modem Output <PIN CODE>

24.- Modem Input

25.- Modem Output ATI

26.- Modem Input  CINTERION EHS6 Revision 03.001 OK

NOTE:  pops up and says Modem Operation failed - Modem not Initialized

What Do you think is going on? any suggestion or recommendation? 

 

thanks a lot

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...