Tech Posted March 1, 2018 Report Share Posted March 1, 2018 I have some issues in siemens 7.5 H.P Vfd which is connected to EX-A2X. the problem is auto on/off not taking place after power failure.when power resume motor not getting ON automatically. Quote Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted March 1, 2018 MVP 2023 Report Share Posted March 1, 2018 You need to provide a LOT more information before someone can attempt to help you. What PLC? Which I/O module(s)? Is the Run command given via a Digital Output from the PLC I/O or some other communication? Has this been a problem all along or is it new? If this has been happening all along, it sounds like a logic error by the original programmer. If so, it may be a simple fix. Do you have the PLC program .vlp file? If so, attach it and someone should be able to give it a look over. Quote Link to comment Share on other sites More sharing options...
chanakamilan Posted January 20, 2021 Report Share Posted January 20, 2021 EX-A2X pregaming software Quote Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted January 20, 2021 MVP 2023 Report Share Posted January 20, 2021 The EX-A2X does not require software. What is your question? Joe T. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.