Jump to content

Ethernet/IP with ABB PSTX Softstarters


Recommended Posts

Once again, I ran into a roadblock where the manufacturer's tech support people couldn't tell me the necessary parameters to set up the EIP communications with a Unistream. They could only direct me to an EDS file online.

With past experience, the EDS file print out, and some trial and error I found the following parameters to work:

Input Assembly Instance: 100, size 24

Output Assembly instance: 150, size 10

Configuration Assembly Instance : 5, size 0

Check the box for "Use Run Idle for O2T" on the Output Assembly Instance

For the Creators: Is there any plan to eventually be able to install EDS files through Unilogic? This would greatly speed up the development time.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...