Jump to content

Recommended Posts

Hi. I'm using the "Strt trnd ->SD" to write trend data to SD card.  I can see that the first time of writing and reading to/from the card is O.K and I can see the data on HMI. The file size on the sd is very small (5K) even the sample is every 1 min. and the process lasted for 3.5 hours.

At the second time, after few hours (my process is very long) after about 5 hours, when i stop saving to the card, the "In Progress (OFF at Stop Trend): Start Trend->SD" remains in 1, and when i try to read from the card i get the "Trend load error bit".

when i look in the SD with the SD manager, i see only the 1st Process trend and nothing from th 2nd process.

 

Please Advice.

Itzik

30000000.UTR

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...