umer Posted November 23, 2018 Report Share Posted November 23, 2018 Dear all i have a problem in HMI it gives an error of stop mode plc how can i reset it or jump to run mode Quote Link to comment Share on other sites More sharing options...
MVP 2021 Ausman Posted November 23, 2018 MVP 2021 Report Share Posted November 23, 2018 Can you please post a picture of the screen. cheers, Aus Quote Link to comment Share on other sites More sharing options...
GioSerrano Posted March 22, 2019 Report Share Posted March 22, 2019 I have the same issue with a Vivion V1040. Initially HMI is totally en white color, then en Info Mode appears a message in red color: PLC in stop mode! Quote Link to comment Share on other sites More sharing options...
MVP 2021 Joe Tauser Posted March 24, 2019 MVP 2021 Report Share Posted March 24, 2019 Can you download a blank program to it? Joe T. Quote Link to comment Share on other sites More sharing options...
ReggiNason Posted March 27, 2019 Report Share Posted March 27, 2019 Hi,...that is generally caused by noise in the system somewhere usually coming in on the I/O wires.How long has this system been in use? Do you have VFD's connected? Large inductive loads such as contactors or solenoids? Mostly the pcb assembly of this module has all these connections but sometimes during the installation these connections are being removed also. Make sure to check all these connections of components. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.