Heitor 0 Posted December 13, 2018 Report Share Posted December 13, 2018 Hi. I'm need help for the function storage the date. Is possible to monitor the time when the output is up? My proccess need a logic for to monitor a output but the time can isn't reset when the output is down. I'm monitoring the useful life of lamp. The time need reset when a lamp is replaced. Is possible with V350-J-TR20? Quote Link to post Share on other sites
Flex727 279 Posted December 13, 2018 Report Share Posted December 13, 2018 Just increment a register (ML) with contacts SB 13 and your output in series. Divide the result by 3600 to obtain hours. Unless the PLC battery dies and 24V power is removed the PLC will retain all register values. Quote Link to post Share on other sites
Heitor 0 Posted December 14, 2018 Author Report Share Posted December 14, 2018 Thank you. Quote Link to post Share on other sites
Heitor 0 Posted December 14, 2018 Author Report Share Posted December 14, 2018 how much time and data will storage in memory whitout power? Quote Link to post Share on other sites
Flex727 279 Posted December 14, 2018 Report Share Posted December 14, 2018 The PLC battery will last for years, but is only used when there is no 24V power applied. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.