Jump to content

6 pin RJ45 screwed terminal


Ausman

Recommended Posts

  • MVP 2023

Maybe this type of connector is useful in commisioning, but i do not use this type of connector in installation. 

There is a risk of damage to the PLC connector by  applying some forсe to the adapter or cable.
Especially in the presence of vibration.
I usually use something like a classic adapter (MJ10-22-CS25 or the same).
Which is fixed not far from the controller and connected to OPLC with a flexible, standard short cable.

Link to comment
Share on other sites

  • MVP 2023
5 hours ago, kratmel said:

I usually use something like a classic adapter (MJ10-22-CS25 or the same).

Ahh yes....but not if you are using 485!  Depending on local conditions dictates whether one of these goes in the final install, or I make up my own custom 6pin plug.   For ease of trials, though, this type is great.

cheers, Aus

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...