Daniel_Iceland 0 Posted October 12, 2019 Report Share Posted October 12, 2019 I am using a USC-B5-R38 to run two inverters UMI-022BE-B1 most of the time I try to start them running with "VFD Run frequency Mode" the output code becomes -4 (goes through 2 before) The VFDs are active, Enable communication is on vfd is connected = 1 Enable periodic status Read = 1 I can download and upload profiles but trying to get the inverters running nearly always gives me error nr -4 "Communication timeout exceeded" . (mod edited out your email address, Daniel) Quote Link to post Share on other sites
kratmel 63 Posted October 12, 2019 Report Share Posted October 12, 2019 Is it this VFD settings correct? P00.01 Run command channel = 2, P00.06 or P00.07 Frequency command selection = 8 Quote Link to post Share on other sites
NoamM 11 Posted October 15, 2019 Report Share Posted October 15, 2019 Dear Daniel_Iceland, Open a ticket on Unitronics "Help center" at https://support.unitronics.com/index.php the Support team will assist. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.