Jump to content

Recommended Posts

I have V1040 connected to IO-16A3-RO16

the 2 highspeed inputs are connected to

DW 7 and DW 8 with frequency measurement 1000msec

on the HMI I have 2 displays (variable Numeric) linked to DW7, DW8

The LEDs   4,5,6,7 (on the I/O module are on)

I have 24V pulses (50% duty) on input pins 36 and 38. changed the frequency from 1Hz to 300Hz

the value on the display is not changing

help is apreciated

best regards

Kurt

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...