Jump to content

Version 1.28.26 Issues


R Smith

Recommended Posts

UniLogic seems to crash every time I download a program via USB. I have reinstalled UniLogic and made sure the panel (USP-070-B10) is up to date (1.28.39) with no joy.

The download will usually succeed, on the panel but UniLogic freezes and needs to be shut down manually (sometimes via task manager). Then I can restart UniLogic, let it recover the latest program and go Online with the panel. Then I make some updates and start the process all over again.

I am running Windows 7 Pro on a Dell M6800 which I have had little issue in the past with. I recently updated to 1.28.26 and this seems to be when the issues began. I am still not sure if they are related to the PC or the software. Its been a few months since I actively programmed in UniLogic.

Is anyone else experiencing this with 1.28.26?

I am considering rolling back but I fear this will affect the program and firmware.

Thanks,

Rich

Link to comment
Share on other sites

I'm not aware of any problem that causes UniLogic to freeze after download. Since UniLogic did not crash, then I did not get any crash report from you, so it will be hard for me to guess were the program hangs.

UniLogic does not crash or hangs if you download the project via Ethernet? (You mentioned USB, but I doubt that it has any effect).

 

Which version of UniLogic you had before 1.28.26?
 

Link to comment
Share on other sites

OK, I installed version 1.28.26 onto another workstation (Dell M6600) and had no issues. Downloaded multiple programs, viewed online, works fine.

So it must have something to do with my workstation. Conflicting drivers, corrupt drivers, conflicting programs...? I don't know.

I will try to uninstall UniLogic completely, uninstall drivers and reinstall.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...