Jump to content

Accuracy in Reading Pressure


Recommended Posts

  • 1 month later...
On 11/29/2019 at 6:23 AM, sandip B patel said:

but reading pressure is delay and pressure going overflow up to 10 bar

Please elaborate - if you monitor the pressure online it lags the actual pressure?

How can you tell and how much is it delayed?

Joe T.

Link to post
Share on other sites

So what you're saying is the process pressure keeps rising after you shut the valve.  Like its got a spring in it.

I don't think this is a PLC problem, as the HMI and the gauge agree.  If you observe the process when the valve closes, does the gauge say 80 or 90?

What's probably happening is you have some stored energy in the system somewhere in the form of an air bubble or the valve isn't closing quickly enough to clamp the pressure at the setpoint you want.  Without being there to look at it I can only guess.

If the overshoot is always 10 bar or it's predictably linear in some way, I'd modify the logic to shut the valve sooner based on actual observed (empirical) process data.

Joe T.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...