Jump to content

Recommended Posts

Hello,

I'm having trouble setting  time and date using function "set plc time and date" from network. The time and date are read from the network but not written to the PLC.

version:      unilogic: 1.28.34   panel: 1.28.58

I used the example:    "UniStream_070_RFC_1305_UDFB._419_bck.ulpr".

Thank you

Link to post
Share on other sites

Hi,

After upgraded to version 1.28.34
try to upgrade CPU FPGA.

There are changes in RTC in this version.

UniLogic_Version_Changes.pdf

RTC /GMT:   UniStream now supports two clocks, Local Time and GMT. You can use these in Ladder elements, HMI Widgets, and set them via UniApps.

A new parameter has been added to the RTC struct, Time Zone Existing Ladder functions Set PLC Time/Date now have a new parameter, Status. New System structs have been added, UTC Time and UTC Date

We had this problem with the USC-P-B10  and now works OK.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...