Jump to content

Recommended Posts

I use a V700 with V200-18-E3XB module.

I connect some switches to the digital inputs that work fine and some leds to the digital outputs so i can test my project.
I connect them according to snap in I/O manual pdf

 but i have no  voltage on the outputs

although in the program the output bits goes high.
Any idea what the problem might be?

 

Link to post
Share on other sites

1.  There are multiple locations on the -E3XB module to connect power.  Verify you have power connected to V1 and 0V.

2.  Most of the outputs on this module are relays.  Are you saying you have no voltage on them or on O0 and O1?  Are the relays on the other outputs clicking?

Joe T.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...