viscoelastic 13 Posted April 22, 2020 Report Share Posted April 22, 2020 Did not see this question elsewhere: From the ladder is there a way to check which screen is in focus? I thought about setting a coil when they switch screens, but there has to be an easier way. Thanks, Stay Healthy my friends! Quote Link to post Share on other sites
AlexUT 55 Posted April 22, 2020 Report Share Posted April 22, 2020 Use Utils->HMI funktions. Or assign MB for display(s) from "Links & Jumps" HMI properties. B,R. Quote Link to post Share on other sites
viscoelastic 13 Posted April 22, 2020 Author Report Share Posted April 22, 2020 Thanks, much appreciated, although So simple, a tad embarrassed I posted it. 😉 Quote Link to post Share on other sites
Flex727 264 Posted April 22, 2020 Report Share Posted April 22, 2020 It's funny, no matter how experienced you may be, there's always some little something that got by you. Don't be embarrassed. Quote Link to post Share on other sites
Ausman 203 Posted April 22, 2020 Report Share Posted April 22, 2020 + to Flex. I still roam around the menus and find stuff I didn't know. "How did I miss that before" is muttered quietly, whilst inwardly cursing for being such a dumbo! cheers, Aus Quote Link to post Share on other sites
Flex727 264 Posted April 23, 2020 Report Share Posted April 23, 2020 Yep. Still happens to me nearly every day. Quote Link to post Share on other sites
Pavel M 1 Posted April 23, 2020 Report Share Posted April 23, 2020 There are SI251 and SI252 which shows previous HMI display number and current HMI display number Quote Link to post Share on other sites
AlexUT 55 Posted April 23, 2020 Report Share Posted April 23, 2020 Be careful with these SIs. Display numbers are assigned random. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.