Jump to content

How to upload program when project upload may have been disable been


Recommended Posts

Hi 

I have a HMI PLC  V350, I want to upload program but it didn't not allow and display warning

"This project cannot be uploaded because:
- the option 'Burn Upload Project' was not selected when the project was downloaded,
or
- due to incomplete data in the PLC"

Please help me solve this! I have already been purchase new one to replace the damaged HMI PLC.

 

d1764a6175948fcad685.jpg

47f2890c81887bd62299.jpg

Link to post
Share on other sites

The other option is to save the program to a file on the SD card, but once again, this is an option the programmer must authorize in the original program (and supply you with a password).

This is intentional to protect the intellectual property of the programmer.

  • Like 1
Link to post
Share on other sites
10 hours ago, phu.vu@ptt.vn said:

.....replace the damaged HMI PLC.

If screen damaged or touch sensor and program transfer is not possible (you do not have original project)  and you purchase the same model of V350  maybe one option is present.

You can reinstall old IO and main board to new V350. 

Usually I do not recommend doing it without experience, but as experienced engineers say - the eyes are afraid, but the hands can do it. 🛠️

  • Like 1
Link to post
Share on other sites
7 hours ago, kratmel said:

If screen damaged or touch sensor and program transfer is not possible (you do not have original project)  and you purchase the same model of V350  maybe one option is present.

You can reinstall old IO and main board to new V350. 

Usually I do not recommend doing it without experience, but as experienced engineers say - the eyes are afraid, but the hands can do it. 🛠️

Actually, Replace screen and key pads  is not possible.

Link to post
Share on other sites
8 hours ago, phu.vu@ptt.vn said:

Actually, Replace screen and key pads  is not possible.

phu.vu, do you understand what Kratmel is suggesting in saying this?  This might just be a translation issue. 

Or are you saying that the screen and keypads etc are all ok, and thus it is the main board etc that are faulty so changing them into a "new body" is not applicable in this case?

It seemed to me that some clarification was necessary.

cheers, Aus

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...