Silver75 0 Posted June 1, 2020 Report Share Posted June 1, 2020 Hi there, approaching Unilogic for the first time, I am trying to connect the HMI to the PLC with no success. I set up PLC IP at 192.168.1.1 HMI IP at 192.168.1.5 VNC at 192.168.1.6 I enabled the VNC server working mode in the password management and filled the connection 01 both in the PLC and in the HMI with same IP. 192.168.1.6 and same password. I still get the error unable to connect to VNC server in the panel. Any help would be appreciated thanks! Silver Quote Link to post Share on other sites
Joe Tauser 353 Posted June 1, 2020 Report Share Posted June 1, 2020 Point the VNC panel at the HMI - 192.168.1.5. Joe T. Quote Link to post Share on other sites
Ofir 32 Posted June 1, 2020 Report Share Posted June 1, 2020 Hello, Please see below link to article in Unitronics support portal: https://support.unitronics.com/index.php?/selfhelp/view-article/how-to-connect-usl-to-usc-via-vnc Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.