CobryWZL 0 Posted June 30 Report Share Posted June 30 Hi guys, I recently asked myself, if theres a possibility to read NFC tags using a SAMBA PLC. Usually NFC readers have a USB interface and need a PC to read the information on a NFC tag. Did anybody ever try to use a SAMBA or other Unitronics PLC instead of a PC to read NFC information? Is there any hardware you can recomment? Best regards Quote Link to post Share on other sites
AlexUT 55 Posted June 30 Report Share Posted June 30 Vision PLCs has USB-A or USB-Mini interface, which can be used only for programming, or online communication with PC. Vision PLCs does not support external USB devices. You have to find NFC reader with RS232 or RS485 interface - then you canm use it with PLC. B. R. Quote Link to post Share on other sites
kratmel 55 Posted June 30 Report Share Posted June 30 Hi, maybe best solution is to use Ethernet card and connection to the Samba. Device like this https://minovatech.de/mcr08-nfc-rfid-hf-en.php has Ethernet, RS232 and 485 port present also. Quote Link to post Share on other sites
Cam 25 Posted June 30 Report Share Posted June 30 RFIdeas has readers with RS232 interfaces. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.